Poulton is a small village east of Cirencester, about 5 miles from Jack's base, on the way towards Fairford. It is a village of older homes in a conservation area, which means most electrical jobs here are about bringing an older installation up to date without spoiling the house: inspections when a property changes hands, partial rewires, extra sockets and better lighting.

Working in Poulton
Poulton is a village and parish in Cotswold district with a Cirencester postcode and a population of 408 at the 2011 census. It has a long history for a small place: it appears in the Domesday Book, and it was part of Wiltshire as a detached enclave until 1844, when it moved into Gloucestershire. The parish church of St Michael and All Angels was built in 1873 by William Butterfield.
The village has a conservation area, designated on 17 February 1981 according to Cotswold District Council's Poulton conservation area map. The national planning data register lists no published appraisal for it, so the council map is the main reference for whether a property is inside the boundary.
In a village of older homes, the electrical work tends to follow the house rather than the fashion. A buyer wants to know the condition of the wiring before they commit. A family that has lived in a house for years wants more sockets where they actually use them, better kitchen lighting, or a consumer unit with modern protection. A full rewire may not be needed at all: an inspection and test shows which parts of the installation are sound and which are not, and the quote can be built around that.
Older stone homes also need care in how the work is done. Historic England advises that services in an older building may need different routes from those in a modern home, to avoid permanent damage. If a house is listed, consent is needed for internal changes that affect its character, so check before any walls are chased.
Jack is based in Cirencester, so Poulton is a short drive east. Tell him the postcode, the type of property and what you need.
The map shows Poulton and the area around it. Open in Google Maps.
Poulton jobs and what to send Jack
The jobs Poulton homeowners, landlords and businesses most often need, what to send Jack before he quotes, and the guide that goes with each.
| The job | What to send Jack | Read first |
|---|---|---|
| Inspection before you buy | The address, the age of the house if known, and any electrical certificates the seller has passed on. | EICR for home buyers |
| Partial rewire of an older home | Whether the house is listed, which rooms or circuits are affected, and the finishes that must be kept. | Rewiring an older home |
| Extra sockets | Which rooms, roughly how many, and photos of the walls where you want them. | Extra sockets cost |
| Downlights or new lighting | The rooms, the ceiling type (plaster, beams, a room above) and the look you want. | LED downlight cost |
| Selling a house | Which electrical work has been done and when, and what certificates you can find. | Certificates when selling |
Signs an older installation needs looking at
Electrical Safety First is clear that there is no fixed age at which a home must be rewired, and that old wiring is not automatically unsafe. What matters is its condition. It does say that electrics more than 50 years old should be checked and updated, and it lists a few signs that are worth acting on sooner.
| What you might see | What it can mean | Next step |
|---|---|---|
| Round pin sockets | Part of the installation is very old. | Book an inspection before relying on those circuits. |
| Braided flex hanging from ceiling lights | Old lighting cable that may not meet current standards. | Ask for the lighting circuits to be inspected and tested. |
| Sockets set into skirting boards | An older layout, often from a much earlier installation. | Include them in the inspection, and plan new positions if you are rewiring. |
| Burn marks, crackling or warm sockets | A fault that needs attention now. | Stop using it and call an electrician. |
| No RCD on the consumer unit | The board does not have the protection modern installations use. | Ask whether the board can be upgraded once the circuits are tested. |
Electrical Safety First also recommends that buyers have the electrics checked before they commit to a property. In a village of older homes like Poulton, that report is the most useful document you can have before you buy.
When a partial rewire is enough
A full rewire is not the only answer for an older house. An inspection and test shows the condition of each circuit. Where the cables test sound, it can be possible to keep them, fit a new consumer unit with modern protection, and replace tired sockets and switches. Where a circuit fails its tests, or old rubber or fabric covered cable turns up, rewiring that circuit is usually the next step.
That is why the order matters. Test first, then decide. A quote that starts from the test results is built around the house, and you are not paying to replace wiring that is still in good condition. Jack’s guide to EICR codes explains how the findings are graded, and the full or partial rewire guide covers the choice in more depth.
In a listed house, the route each new cable takes matters as much as the cable itself. Historic England advises that services in an older building may need different routes from those in a modern home, to avoid permanent damage. Agree the routes before any work starts.

When Jack visits
Poulton is about 5 miles east of Cirencester. For a quote, Jack looks at the consumer unit, the rooms involved and how new cables can be routed without damaging finishes. For an inspection, he needs access to every room and to the board, and the power will be off for part of the testing.
If you are buying, check with the seller or agent that the inspection can go ahead before booking it.
What Jack does in Poulton
- EICRs and electrical safety reportsFor buyers, sellers, landlords and homeowners.
- Full and partial rewiresPlanned around older walls, beams and listed features.
- Lighting and power alterationsExtra sockets, downlights and kitchen circuits.
- Consumer unit upgradesModern protection for an older installation.
- Chandelier installationHeavy and period light fittings hung safely.
Photos from Jack’s work
A few of Jack’s own job photographs, to show the standard of finish. They are not all from Poulton.



Electrician in Poulton
Get a quote from Jack
Jack is about 5 miles from Poulton in Cirencester. Send these with your first message so the quote reflects the house, not a guess.
- Your postcode, so Jack can plan the visit.
- The property: house, cottage, flat, holiday let, barn or business unit, and roughly how old.
- What you need done, and by when.
- Any photos, plans or a previous certificate or report.
Call 07380 944864WhatsApp JackEmail Jack
It goes straight to Jack, no forms and no middleman. Prefer the full list of options? Ask for a quote on the contact page.
Guides for Poulton jobs
What an EICR tells a Cirencester home buyer, how it differs from a home survey, when to arrange one and which electrical records to request.
How to plan rewiring in an older Cirencester home: check consent, protect historic fabric, agree cable routes, coordinate trades and retain certificates.
Extra sockets cost in Cirencester: UK ranges with VAT, cable routes, fitting choices and completion records to compare before asking Jack for a fixed quote.
Which electrical certificates matter when selling a house, whether an EICR is required, how to recover missing records and what each document proves.
Questions from Poulton
Does JI Electrical cover Poulton?
Yes. Jack is based in Cirencester, about 5 miles from Poulton, and works on homes and businesses in the village. Call 07380 944864 or message him with your postcode and the job.
I am buying an older house in Poulton. Should I get an electrical inspection?
It is worth it for an older home. An EICR records the condition of the installation from inspection and testing, so you know what needs attention before you commit. The home buyer EICR guide explains what the report covers.
Is Poulton a conservation area?
Yes. Cotswold District Council's map shows it was designated on 17 February 1981. Conservation area controls mostly concern the outside of buildings. If your home is listed, internal changes that affect its character also need consent.
Do I need a full rewire to add sockets or new lighting?
Not always. An inspection and test shows whether the existing circuits are sound enough to extend. If they are, extra sockets or lighting can be added without a full rewire. See the extra sockets guide.
Is there a call-out or travel charge for Poulton?
Ask when you book. Any visit, call-out or travel charge should be stated before the visit and written on the quote.
Nearby areas
From Poulton, Jack also covers the Ampneys (Ampney Crucis, Ampney St Peter and Ampney St Mary), Down Ampney and Driffield, and Fairford a little further east.
- Electrician in South Cerney
- Electrician in Ashton Keynes
- Electrician in Fairford
- Electrician in Tetbury
- Electrician in Stroud
- Electrician in Cheltenham
- Every area Jack covers
Customer reviews
What customers say about Jack
Jack did a great job installing new spotlights in our kitchen. He turned up on time, worked efficiently, and everything was finished to a really high standard.
Jack and his colleague Freddie arrived on time, worked efficiently, and everything was completed to a really high standard. The price was fair and they left everything clean and tidy afterwards.
I contacted JI Eletrical within 24hrs with an issue and they came to fix it quickly and not had a problem since!
Sources
- Wikipedia: Poulton, Gloucestershire (population, history, church)
- Cotswold District Council: Poulton conservation area map
- Historic England: listed building consent
- Historic England: installing services in an older home
- GOV.UK: Approved Document P, electrical safety in dwellings
- Electrical Safety First: Do I need a rewire?
- Electrical Safety First: advice for home buyers